Resources | Aerodynamics for Students

NACA 4 or 5 Digit Milling Machine

This tool creates NACA 4 or 5 Digit section straight wings. The required inputs for the milling process are the NACA designation number, the number of data points to construct and the span of the wing. An optional section identification name can be entered so that this section can be retrieved at a later stage from amongst the many, many others kept in the store room. Note: all wings produced by this machine are 1m chord.

NACA Designation Number:
(must be 4 or 5 Digits)

Number of Coordinates:
(max 121, minimum 21)

Span of Wing:
(max 10, minimum 1.5) Units are in meters.

Name for Section:

(to be used for identification and storage purposes).