Wind Tunnel Specifications.

     Test Section Height :  8m                			
     Test Section Width :   10m
     Speed Range :  5 m/s to 100 m/s
     Balance : Six component load cell
     Max loads : Lift      1000000 N
                 CrossWind 1000000 N
                 Drag      1000000 N
                 Pitch      100000 Nm
                 Roll       100000 Nm
                 Yaw        100000 Nm
     Turbulence Level < 1%
                                                       
     Scanivalve static pressure system. 181 ports max.
                                                                         
     Balance, Pressure and Velocity measuring devices are all
     currently operational and have been calibrated
     on Sept 21st 2011. All calibration factors = 0.999

---